Curriculum Vitae

Chris S Edrington

February 21, 2019

General Information

University address:	Electrical and Computer Engineering
FAMU-FSU College of Engineering
2525 Pottsdamer Street B-371
Florida State University
Tallahassee, Florida 32310
Phone: (850)410-6140; Fax: (850)410-6479

E-mail address:	edrinch@eng.fsu.edu

Web site:	http://eng.fsu.edu/ece/directory/chris_edrington/

Professional Preparation

2004	Ph.D., University of Missouri-Rolla, Rolla, MO. Major: Electrical Engineering. Supervisor: Dr. Babak Fahimi. 

Chris S. Edrington. (2004). Bipolar Excitation of Switched Reluctance Machines. (Doctoral dissertation, University of Missouri-Rolla, Rolla, MO). Retrieved from ProQuest Dissertations & Theses, http://search.proquest.com, 3143774. 

2001	MS, University of Missouri-Rolla. Major: Electrical Engineering. Control Systems. 

1999	BS Engineering, Arkansas State University. Major: Engineering. Electrical Engineering. Magna Cum Laude. 

Professional Credential(s)

2014–present	Member American Society of Naval Engineers. 

2009–present	Senior Member: Institute for Electrical and Electronic Engineers. 

2007–present	Registered Professional Engineer, State of Arkansas, #12952. 

Professional Experience

2016–present	Professor of Electrical and Computer Engineering, Florida State University. 

2012–2016	Associate Professor of Electrical and Computer Engineering, Florida State University. 

2011–2016	FSU Campus Director FREEDM Systems Center, Florida State University. Direct Young Scholars program and other outreach programs throughout the year, manage the FREEDM System Center award, and serve on the FREEDM Systems Center leadership and campus director teams.

2013–2015	Associate Director, Center for Advanced Power Systems, Florida State University. 

2014	Interim Director for the Center for Advanced Power Systems, Florida State University. 

2007–2012	Assistant Professor, Electrical and Computer Engineering, Florida State University. 

2007	Researcher, Electrical and Computer Engineering, Florida State University. 

2004–2007	Assistant Professor, College of Engineering, Arkansas State University. Teach a variety of general engineering and electrical engineering courses, conduct research, and perform appropriate committee service for the college and the university.

Honors, Awards, and Prizes

Sabbatical, Florida State University (2015). 
Guardian of the Flame, Burning Spear Inc (2015). 
FAMU-FSU College of Engineering Research Award (2014). ($2,500). 
Innovator Award, FSU Office of Research (2013). 
FAMU-FSU College of Engineering Teaching Award (2011). ($1,500). 
1st Prize Paper Award, IEEE Transactions on Industrial Electronics (2011). ($1,000). 
IEEE Industrial Application Society – Industrial and Commercial Power Systems Conference Service Award, IEEE (2010). 
Best Paper Award, International Multi-conference on Complexity, Informatics and Cybernetics (2010). 
IEEE Industrial Electronics Society – Electrical Machines Technical Committee Award, IEEE (2010). 
Electric Ship Technology Symposium Best Paper Award, IEEE (2009). 
Industrial Electronics Society – Electrical Machines Technical Committee Award, IEEE (2009). 
First Year Assistant Professor, Florida State University (2008). ($16,000). 
2nd Place Prize Transactions Paper, IEEE - Industrial Applications Society (2006). 
Outstanding Power Engineering Award, Grainger Foundation (2005). 
Who's Who's in Engineering Academia, Academic Keys (2005). 

Current Membership in Professional Organizations

American Society of Naval Engineers 
Eta Kappa Nu Electrical and Computer Engineering Honor Society 
Institute for Electrical and Electronic Engineers -- Senior Member 
Phi Kappa Phi Honor Society 

Teaching

Courses Taught

Fundamentals of Power Systems (EEL 3216)
Electromechanical Dynamics (EEL 4220)
Electromechanical Dynamics (EEL 5930)
Power Systems I (EEL 4213)
Advanced Electrical Machines and Drives (EEL 5930)
Design of Rotating Electrical Machinery (EEL 5930)
Advanced Circuits with Computers (EEL 3112)
Advanced Circuits with Computers (EEL3112)
Advanced Electrical Machinery and Drive Systems (EEL5930)
Electromechanical Dynamics (EEL4220)
Design of Rotating Electrical Machinery (5930)
Fundamentals of Power Systems (EEL3216)
PV Integration Studies (EEL 6905)
RT-MEC (EEL 5905)
A Comparison of the Performance of P2P Protocols in a Simulated Attack Environment using OMNeT++ (EEL 4905)
Survey of Power System Stability in a Multi-machine Environment (EEL 4905)
Harmonic Mitigation w/PVs (EEL 5910)
AC magnetic shielding properties of YBa2Cu3O7-coated high-temperature superconducting material subjected to axial and radial fields (EEL 4905)
MicroGrid Systems (EEL 5905)
Mod/Sim DSR Drives (EEL 4905)
Simulation and Modeling of Electromagnetic Devices (EEL4930)
Communications Theory (ECIE 4333)
Electric Circuits I Lab (ECIE 2321)
Electronics II (ECIE 4373)
Intermediate Electrical Engineering Lab (ECIE 4371)
Digital Electronics (ECIE 3333)
Electronics I (ECIE 3403)
Microprocessor and PLC Applications (ECIE 4344)
Electric Circuits I (ECIE 2323)
Electric Circuits II (ECIE 3313)
Control Systems (ECIE 4313)
Statics (ENGR 2403)
Dynamics (ENGR 3425)
Power Electronics and Control (ECIE 4723)

Doctoral Committee Chair

Gonsoulin, D., graduate. (2018). Hierarchal Distributed MPC for Energy Management. 
Langston, J., graduate. (2018).
Papari, B., graduate. (2018). Real-time Intelligent Energy Management for AC-DC Hybrid and Interconnected Microgrids. 
Perkins, D., graduate. (2018). Adaptive Droop Control for Power Management in DC Microgrids. 
Yang, H., graduate. (2018). Sensor Fault Detection with Fault Tolerant Control for System Resiliency and Optimization Improvement. 
Diaz, F., graduate. (2017).
Paran, S., graduate. (2016). Distributed Model Predictive Control for Intelligent Management of AC Microgrids. 
Ferdowsi, F., graduate. (2016). Real-time Dynamic Behavorial Observation in Power Systems Using Nonlinear Time Series Analaysis. 
Vu, T., graduate. (2016). Distributed Robust Adaptive Droop Control for DC Microgrids. 
Fleming, F., graduate. (2014). Realtime Switched Reluctance Machine Emulation via Magnetic Equivalent Circuits. 
Leonard, J., graduate. (2014). Nonlinear Modeling of DC Constant Power Loads with Frequency Domain Volterra Kernels. 
Salmani, A., graduate. (2014). Real-time Impedance-based Stability Assessment of the Power Electronic-based Components in Contemporary Distribution Systems. 
Ozkan, G., doctoral candidate.  Utilization of Distributed Predictive Control for Wind Power Generation. 
Ravindra, H., doctoral candidate.  Energy Storage for Ship Power Systems. 
Stright, J., doctoral candidate.  An Investigation of Topological Influences on Power Grid Steady-state Stability. 

Doctoral Committee Cochair

Nyanteh, Y., graduate. (2013). Application of Artificial Intelligence to Rotating Machine Condition Monitoring. 
Leng, S., graduate. (2012). Coordination of Multiple Active Front-End Converters for Power Quality Improvement. 

Doctoral Committee Member

Mo, R., graduate. (2017).
Nikhil, G., graduate. (2014).
Guifeng, L., graduate. (2013). Using Entropy To Improve The Resolution In Non-parametric Spectral Estimation. 
Fan, H., graduate. (2011).
Deng, Y., graduate. (2010).
Henry, S. D., graduate. (2010).
Danku, M. A., graduate. (2009).
Thai, H. T., doctoral candidate.  Tracking Real Time Signals in Time Frequency Plane Using Adaptive Notch Filters. 

Doctoral Committee University Representative

Yu, W., graduate. (2010).

Master's Committee Chair

Sundararajan, S., graduate. (2016). Performance Analysis of Distributed Control Methods in Electrical Energy Systems on a Hardware in the Loop Simulation Test Bed. 
Bresland, P., graduate. (2015). High Frequency Simulation Models of Rotating Machines in Ungrounded Shipboard Power Systems based on Inverse Scattering Theory. 
Mohebali, B., graduate. (2015). Validation of a Scattering Parameter Based Model of a Power Cable for Shipboard Grounding Studies. 
Griffin, L., graduate. (2014). Application of Advanced Optimization and Control for Enhanced Operation of Switched Reluctance Machines. 
Pothavajhala, V., graduate. (2014). Modeling and Analysis of Superconducting Cables. 
Widener, C., graduate. (2014). Solid State Fault Isolation Device Integration with Power Electronic Based Distribution Systems. 
Paran, S., graduate. (2013). Utilization of Impedance Matching to Improve Damping Impedance Method-Based PHIL Interface. 
Soto, D., graduate. (2013). Gas Turbine-Generator System Duality Study for Real-Time PHIL EMULATION USING POWER ELECTRONICS CONVERTERS. 
Akar, F., graduate. (2012). Computationally Intelligent Algorithms in Maximum Torque per Ampere Strategies in Switched Reluctance Machines at Low Speeds. 
Bevis, T., graduate. (2012). Information-Theoretic Characterization of Dynamic Energy Systems. 
Stroupe, N., graduate. (2012). Real-Time High Speed Generator System Emulation with Hardware-in-the-Loop Application. 
Liu, Y., graduate. (2011). Application of Intelligent Tuning Algorithms for Three-Level NPC Rectifier for Shipboard Power Distribution. 
Patil, P., graduate. (2011). Magnetization AC Losses in Second Generation High Temperature Superconductors. 
Sattler, M., graduate. (2011). Utilization of Nonlinear Dynamics in the Converter Design Process. 
Cao, J., graduate. (2011). Analysis and Implementation of Grid-connected Solar PV with Harmonic Compensation. 
Hacker, B. A., graduate. (2010). Development of a Virtual Grid Interface for PHEV Integration Analysis. 
Fleming, F. E., graduate. (2010). Development and Implementation of a 25 kVA Phasor Based Virtual Machine. 

Master's Committee Cochair

Sun, K., graduate. (2016).
Rentachinthala, K., graduate. (2012). Co-simulator Interface Design. 
Thevarajan, T., graduate. (2011). Decentralized Multiobjective Optimization for a Heterogeneous System. 
Infante, D., graduate. (2011). Guiding the Selection of Physical Experiments for the Validation of a Model Designed to Study Grounding in DC Distribution Systems. 
Lee, D. D., graduate. (2010).
Quiroga, J., graduate. (2008). Stator Winding Fault Detection for a PMSM Using Fuzzy Logic Classifier and Neural Network Model Identification. 

Master's Committee Member

Alquthami, T. S., graduate. (2011).

Research and Original Creative Work

#Research and original creative work that occurred before employment at FSU. *Research and original creative work that occurred between initial employment at FSU and time at which I went up for tenure and promotion to Associate Professor. Refereed Proceedings do not typically have impact factors in electrical engineering. Data for citations is derived from Google Scholar. Impact factors are derived from journal websites where available. 

Publications

Refereed Journal Articles

Papari, B., Edrington, C. S., & Gonsoulin, D. (2019). Optimal energy-emission management in hybrid AC-DC microgrids with vehicle-2-grid technology. Journal of Renewable and Sustainable Energy, 11, 1-11.

Papari, B., Edrington, C., Battacharya, I., & Radman, G. (2019). Effective Energy Management of Hybrid AC-DC Microgrids with Storage Devices. IEEE Transactions on Smart Grid, 10(1), 193-203.

Vu, T., Diaz, F., Paran, S., El-Mezyani, T., & Edrington, C. (2017). An Alternative Distributed Control Architecture for Improvement in the Transient Response of DC Microgrids. IEEE Transactions on Industrial Electronics, 64(1), 574 - 584.

Vu, T., Perkins, D., Gonsoulin, D., Edrington, C., & El-Mezyani, T. (2017). Robust Adaptive Droop Control for DC Microgrids. Elsevier - Electric Power Systems Research, 146, 95-106.

Diaz, F., Vu, T., Gonsoulin, D., Vahedi, H., & Edrington, C. (2017). Enhanced Performance of PV Power Control using Model Predictive Control. Solar Energy, 158, 679-686.

Ferdowsi, F., Vahedi, H., Edrington, C., & El-Mezyani, T. (2017). Dynamical Behavioral Observation in Power Systems Utilizing Real-Time Complexity Computation. IEEE Transactions on Smart Grid, pp (99), 8.

Papari, B., Kavousi-Fard, F., & Edrington, C. (2017). An Effective Fuzzy Feature Selection and Prediction Method for Modeling Tidal Current: A Case of Persian Gulf. IEEE Transactions on Geoscience and Remote Sensing, PP (99), 8.

Paran, S., Vu, T., Diaz, F., & Edrington, C. S. (2017). Evaluation of Interface Accuracy for Power Hardware-in-the-Loop Experiments. Electric Power Components and Systems, 45(7), 763-773.

Vu, T., Gonsoulin, D., Diaz, F., El-Mezyani, T., & Edrington, C. (2017). Predictive Control for Energy Management in Ship Power Systems under High-power Ramp Rate Loads. IEEE Transactions on Energy Conversion, 32 (2), 788 - 797.

Fleming, F., & Edrington, C. S. (2016). Real time Emulation of Switched Reluctance Machines via Magnetic Equivalent Circuits. IEEE Transactions on Industrial Electronics, pp(99), 1-1. doi:10.1109/TIE.2016.2521343

Salmani, M., Rahbari-Asr, N., Edrington, C. S., & Chow, M. (2016). Online and Offline Stability Analysis Methods for the Power Electronic-Based Components in Design and Operational Stages. IEEE Transactions on Power Electronics, 31 (4), 3151 - 3164. doi:10.1109/TPEL.2015.2451533

Capelli, M., Ponci, F., Sulligoi, G., Vicenzutti, A., Edrington, C. S., El Mezyani, T., & Monti, A. (2015). Power Flow Control and Network Stability in an All-Electric Ship. Proceedings of the IEEE, 103 (12), 2355 - 2380. doi:10.1109/JPROC.2015.2496789

Edrington, C. S., Steurer, M., Langston, J., Schoeder, K., & El Mezyani, T. (2015). Role of Power Hardware in the Loop in Modeling and Simulation for Experimentation in Power and Energy Systems. IEEE Proceedings, 103 (12), 2401 - 2409. doi:10.1109/JPROC.2015.2460676

Nackel, O., Langston, J., Steurer, M., Fleming, F., Paran, S., Edrington, C. S., & Noe, M. (2015). Power Hardware in the Loop Test of an Air Coil Superconducting Fault Current Limiter. IEEE Transactions on Applied Superconductivity, pp(99), 1.

Nyanteh, Y., Graber, L., Rodrigo, H., Srivastava, S., Edrington, C. S., & Cartes, D. A. (2015). A Novel Approach Towards the Determination of the Time to Breakdown of Electrical Machine Insulating Materials. IEEE Transactions on Dielectrics, 22(1), 232-240.

Salmani, A., Asr, N., Chow, Mo-Yuen, & Edrington, C. S. (2015). Online and Offline Stability Analysis Methods for the Power Electronic-based Components in Design and Operational Stages. IEEE Transactions on Power Electronics, PP(99), 14.

Salmani, M., & Edrington, C. S. (2015). Small signal stability assessment of a single phase solid state transformer through PHIL experiment. International Journal of Power Electronics, 7 (3), 243 - 260.

Hasanzadeh, A., Edrington, C. S., Stroupe, N., & Bevis, T. (2014). Real-Time Emulation of a High Speed Micro-Turbine Permanent Magnet Synchronous Generator using Multi-Platform Hardware-in-the-Loop Realization. IEEE Transactions on Industrial Electronics, 61(6), 3109 - 3118. doi:10.1109/TIE.2013.2279128

Salmani, A., & Edrington, C. S. (2014). Real-time Small Signal Stability Analysis of the Power Electronic-based Components in Contemporary Distribution Systems. Electric Power Systems Research, 47 - 58. doi:10.1016/j.epsr.2014.07.028

Nasirian, V., Davoudi, A., Kaboli, S., & Edrington, C. S. (2013). Excitation Shifting, a General Low-Cost Solution for Eliminating Ultra-Low Frequency Pulsation in Switched Reluctance Machines. IEEE Transactions on Magnetics, 49(9), 5135 - 5149. doi:10.1109/TMAG.2013.2251651

Nyanteh, Y., Edrington, C. S., Srivastava, S., & Cartes, D. A. (2013). Application of Artificial Intelligence to Real-time Fault Detection In Permanent Magnet Synchronous Motors. IEEE Transactions on Industrial Applications, 49(3), 1205 - 1214.

Nyanteh, Y., Srivastava, S., Edrington, C. S., & Cartes, D. A. (2013). Application of Artificial Intelligence to Stator Winding Fault Diagnosis in Permanent Magnet Synchronous Machines. Electric Power Systems Research, 103, 201-213. doi:http://dx.doi.org/10.1016/j.epsr.2013.05

Soto, D., Edrington, C. S., & Balathandayuthapani, S. (2013). Grid Connected PV-APF System with Anti-islanding Protection. International Transactions on Electrical Energy Systems, 23(7), 1049–1070. doi:DOI: 10.1002/etep

Balathandayuthapani, S., Edrington, C. S., Henry, S., & Cao, J. (2012). Analysis and Control of a Photovoltaic System: Application to a High-penetration Case Study. IEEE Systems Journal, 6(2), 213 - 219.

El-Mezyani, T., Wilson, R., Sattler, M., Srivastava, S., Edrington, C. S., & Cartes, D. (2012). Quantification of Complexity of Power Electronics based Systems. IET Electrical Systems, 1 -12. doi:10.1049/iet-est.2011.0019

Hasanzadeh, A., Edrington, C. S., Maghsoudlou, B., Fleming, F., & Mokhtari, H. (2012). Multi-loop Linear Resonant VSI Controller Design for Distorted Loads using the LQR Method'. IET Power Electronics, 5 (6), 841 - 851. doi:10.1049/iet-pel.2011.0400

Soto, D., Edrington, C. S., Balathandayuthapani, S., & Ryster, S. (2012). Voltage Balancing of Islanded Microgrids using a Time Domain Technique. Elsevier - Electric Power Systems Research, 84, 214 - 223.

Vodyakho, O., Steurer, M., Edrington, C. S., & Fleming, F. (2012). An Induction Machine Emulator for High-Power Applications Utilizing Advanced Simulation Tools With Graphical User Interfaces. IEEE Transactions on Energy Conversion, 27 (1), 160 - 172. doi:10.1109/TEC.2011.2179302

Edrington, C. S., Vodyakho, O., Azongha, S., Fleming, F., & Krishnamurthy, M. (2011). Evaluation of Voltage Source IGBT Converters for Three-Phase Induction Motor Drives. International Journal of Power Electronics, 3(6), 561 - 577.

Vodyakho, O., Steurer, M., Neumayr, D., Edrington, C. S., Karady, G., & Battacharya, S. (2011). Solid-State Fault Isolation Devices: Application to Future Power Electronics-based Distribution Systems. IET Electric Power Applications, 5(6), 521 - 528.

Edrington, C. S., Vodyakho, O., & Hacker, B. A. (2011). Development of a Unified Research Platform for Plug-in Hybrid Electrical Vehicle Integration Analysis Utilizing the Power Hardware-in-the-Loop Concept. Journal of Power Electronics, 11(4), 1 - 8.

Wilson, R., Sattler, M., El-Mezyani, T., Srivastava, S., Edrington, C. S., & Cartes, D. (2011). A Measure for Complex Dynamics in Power Systems. Journal of Systemics, Cybernetics, and Information, 9(3), 73 - 78.

Leng, S., Chung, I., Edrington, C. S., & Cartes, D. (2011). Coordination of Multiple Adjustable Speed Drives for Power Quality Improvement. Elsevier - Electric Power Systems Research, 81, 1227-1237.

Hasanzadeh, A., Edrington, C. S., & Mokhtari, H. (2011). Optimal Tuning of Linear Controllers for Power Electronics/Power Systems Applications. Elsevier - Electric Power Systems Research, 81, 2188-2197.

Vodyakho, O., Steurer, M., Neumayr, D., Edrington, C. S., Karady, G., & Bhattacharya, S. (2011). Solid-state Fault Isolation Devices: Application to Future Power Electronics-based Distribution Systems. IET Electric Power Applications, 5 (6), 521 - 528.

Ramachandran, B., Srivastava, S., Cartes, D., & Edrington, C. S. (2010). An Intelligent Auction Scheme for Smart Grid Market Using a Hybrid Immune Algorithm. IEEE Transactions on Industrial Electronics, PP (99), 1 - 10.

Steurer, M., Edrington, C. S., Ren, W., Langston, J., & Sloderbeck, M. (2010). A Megawatt Scale Power Hardware in the Loop Setup for Motor Drives. IEEE Transactions on Industrial Electronics, 57(4), 1254 - 1260.

Vodyakho, O., Edrington, C. S., Steurer, M., & Kim, Tae-Hyung. (2010). Synchronization and Application of Three-phase Converters Utilizing the Power Hardware in the Loop Concept. International Journal of Power Electronics, 2 (3), 286 - 303.

Quiroga, J., Cartes, D., & Edrington, C. S. (2009). Neural Network based System Identification of a PMSM under Load Fluctuation. Dyna, 76 (160), 273-282.

Vodyakho, O., Kim, Tae-Hyung, Kwak, S., & Edrington, C. S. (2009). Comparison of the Space Vector Current Controls for Shunt Active Power Filters. IET Power Electronics, 2(6), 653 - 664.

El-Kharashi, E., & Edrington, C. S. (2008). Modification of Stator Tooth Arrangement in Switched Reluctance Machines for Increased Efficiency. International Review of Electrical Engineering, 3(6), 955 - 961.

Edrington, C. S., Fahimi, B., & Krishnamurthy, M. (2007). An Auto-Calibrating Inductance Model for Switched Reluctance Motor Drives. IEEE Transactions on Industrial Electronics, 54(4), 2165 - 2173.

Krishnamurthy, M., Edrington, C. S., Emadi, A., Asadi, P., Ehsani, M., & Fahimi, B. (2006). Making the Case for Applications of Switched Reluctance Motor Technology in Automotive Products. IEEE Transactions on Power Electronics, 21(3), 659 - 675.

Krishnamurthy, M., Edrington, C. S., & Fahimi, B. (2006). Prediction of Rotor Position at Standstill and Flying Shaft Conditions in Switched Reluctance Machines. IEEE Transactions on Power Electronics, 21(1), 225 - 233.

Edrington, C. S., Kaluvagunta, D. C., Joddar, J., & Fahimi, B. (2005). Investigation of Electromagnetic Force Components in SRM Under Single and Multi-phase Excitation. IEEE Transactions on Industry Applications, 41(4), 978 - 988.

Edrington, C. S., Krishnamurthy, M., & Fahimi, B. (2005). Bipolar Switched Reluctance Machines: A Novel Solution for Automotive Applications. IEEE Transactions on Vehicular Technology, 54(3), 795 - 808.

Invited Book Chapters

Fahimi, B., & Edrington, C. S. (2005). Switched Reluctance Motor Drives. In Emadi, A. (Ed.), Handbook of Automotive Power Electronics and Motor Drives (pp. 415 to 436). Boca Raton, FL : CRC Press. 

Refereed Proceedings

Edrington, C. S., Vu, T., Vahedi, H., Gonsoulin, D., Perkins, D., Papari, B., Ozkan, G., Schoder, K., Ravindra, H., Stanovich, M., Sloderbeck, M., & Steurer, M. (2018). Demonstration and Evaluation of Large-scale Distributed Control for Integrated Power and Energy MVDC Systems on Ships. In ASNE Advanced Machinery Technology Symposium, Washington DC (pp. 8). Philidelphia PA, ASNE. 

Gonsoulin, D., Ozkan, G., Papari, B., & Edrington, C. S. (2018). Effects of Varying Ramp Rate and Amount of Energy Storage. In International Ship Control Systems Symposium, Glasgow, Scotland. Institute of Marine Engineering Science and Technology, London, UK. 

Langston, J., Schoder, K., Steurer, M., Edrington, C. S., & Roberts, R. (2018). Analysis of Linear Interface Algorithms for Power Hardware- in - the- Loop Simulation. In IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society. New York, IEEE. 

Perkins, D., Vu, T., Vahedi, H., & Edrington, C. S. (2018). Distributed Power Management Implementation for Zonal MVDC Ship Power Systems. In IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society, Washington DC. New York: IEEE. 

Ravindra, H., Chalfan, J., Stanovich, M., Schoder, K., Vu, T., Vahedi, H., Edrington, C. S., & Steurer, M. (2018). Dynamic Real Time Simulation Model of a Notional Zonal Medium Voltage DC Shipboard Power System for Controls Evaluation. In ASNE Advanced Machine Technology Symposium, Arlington, VA. Philadelphia, PA ASNE. 

Schoder, K., Stanovich, M., Vu, T., Edrington, C. S., & Steurer, M. (2018). Extended heterogeneous controller hardware-in-the-loop testbed for evaluating distributed controls. In ISCSS International Ship Control Systems Symposium Glasgow, Scotland. Institute of Marine Engineering Science and Technology, London, UK. 

Sloderbeck, M., Ravindra, H., Stanovich, M., Schoder, K., Vu, T., Vahedi, H., Edrington, C. S., & Steurer, M. (2018). Implementation and Baseline Characterization of a Heterogeneous Controller Hardware-in-the-Loop Simulation Platform. In ASNE Advanced Machine Technology Symposium, Arlington VA. Philadelphia, PA. 

Vu, T., Edrington, C. S., & Diaz, F. (2018). Sequence-based Control for Electrothermal Management of Next Generation Integrated Power Systems. In International Ship Control Systems Symposium, Glasgow, Scotland. Institue for Marine Engineering Science and Technology, London, UK. 

Vu, T., Perkins, D., Gonsoulin, D., Edrington, C. S., Papari, B., Schoder, K., Stanovich, M., & Stuerer, M. (2018). Large-Scale Distributed Control for MVDC Ship Power Systems. In IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society (pp. 3431 - 3436). Washington DC, IEEE. 

Ferdowsi, F., Vahedi, H., & Edrington, C. (2017). High Impedance Fault Detection Utilizing Real-time Complexity Measurement. In IEEE Texas Power and Energy Conference, College Station, Texas. New York, NY: IEEE. 

Gonsoulin, D., Vu, T., Diaz, F., Vahedi, H., Perkins, D., & Edrington, C. S. (2017). Centralized MPC for Multiple Energy Storages in Ship Power Systems. In 43rd Annual Conference on Industrial Electronics. New York, NY: IEEE. 

Gonsoulin, D., Vu, T., Perkins, D., Vahedi, H., & Edrington, C. S. (2017). Coordinating Multiple Energy Storages Using MPC for Ship Power Systems. In Electric Ship Technology Symposium. New York, NY: IEEE. 

Papari, B., Edrington, C., & Vu, T. (2017). A Heuristic Method for Optimal Energy Management of DC Microgrid. In IEEE 2nd International Conference on DC Microgrids, Nuremburg, Germany. New York, NY: IEEE. 

Papari, B., Edrington, C., & Vu, T. (2017). Stochastic Operation of Interconnected Microgrids. In IEEE Power and Energy Society General Meeting. New York, NY: IEEE. 

Perkins, D., Vu, T., Vahedi, H., Gonsoulin, D., & Edrington, Chris, S. (2017). Distributed Power Management for DC Distribution System with Model Uncertainties. In Electric Ship Technology Symposium. New York, NY: IEEE. 

Schoder, K., Faruque, O., Leonard, I., Diaz, F., Vu, T., Sloderbeck, M., Edrington, C. S., & Steurer, M. (2017). Evaluation of Power Electronics CHIL Simulation Methods using Multiple Real-Time Modeling and Simulation Algorithms. In Electric Ship Technology Symposium. New York, NY: IEEE. 

Schoder, K., Stanovich, M., Vu, T., Vahedi, H., Edrington, C. S., Steurer, M., Ginn, H., Benigni, A., Nwankpa, C., Miu, K., & Ferrese, F. (2017). Evaluation Framework for Power and Energy Management Shipboard Distribution Controls. In Electric Ship Technology Symposium. New York, NY: IEEE. 

Steurer, M., Edrington, C. S., & Schoder, K. (2017). An Open-source Distributed Control Platform for HIL-based Testing and Demonstration of Advanced Power Systems. In International Federation on Automatic Control. Laxenburg, Austria: Elsevier. 

Vahedi, H., Gonsoulin, D., Perkins, D., Vu, T., & Edrington, C. S. (2017). Seamless Inverter Control Scheme for Ship to Shore Applications. In Electric Ship Technology Symposium. New York, NY: IEEE. 

Vahedi, H., Perkins, D., Gonsoulin, D., Vu, T., & Edrington, C. S. (2017). Optimal Sensor Placement for MVDC Ship Power System. In Electric Ship Technology Symposium. New York, NY: IEEE. 

Vu, T., Edrington, C., & Hopsavian, R. (2017). Distributed Demand Response Considering Line Loss for Distributed Renewable Energy Systems. In IEEE Power and Energy Society General Meeting, Chicago, USA. New York, NY: IEEE. 

Vu, T., Gonsoulin, D., Perkins, D., Diaz, F., Vahedi, H., & Edrington, C. S. (2017). Predictive Energy Management for MVDC All-Electric Ships. In Electric Ship Technology Symposium. New York, NY: IEEE. 

Vu, T., Perkins, D., Papari, B., & Edrington, C. (2017). Distributed Adaptive Control Design for Cluster of Converters in DC Distribution Systems. In IEEE 2nd International Conference on DC Microgrids, Nuremburg, Germany. New York, NY: IEEE. 

Ferdowsi, F., Edrington, C. S., & El Mezyani, T. (2016). Real-time stability assessment utilizing non-linear time series analysis. In North American Power Symposium (pp. 1-6). New York, NY: IEEE. Retrieved from 10.1109/NAPS.2015.7335189

Diaz, F., Vu, T., El-Mezyani, T., & Edrington, C. (2016). Low Voltage Ride-through for PV Systems Using Model Predictive Control. In IEEE North American Power Symposium, Denver, Colorado. New York, NY: IEEE. 

Yang, H., El-Mezyani, T., & Edrington, C. (2016). Real-time Sensor Fault Detection and Isolation in Power System with Hardware Implementation. In IEEE North American Power Symposium, Denver, Colorado. New York, NY: IEEE. 

Vu, T., Paran, S., Diaz, F., El-Mezyani, T., & Edrington, C. (2015). Model Predictive Control for Power Control in Islanded DC Microgrids. In IECON 2015 41st Annual Conference of the IEEE Industrial Electronics Society. New York, NY: IEEE. 

Paran, S., Vu, T., El Mezyani, T., & Edrington, C. S. (2015). MPC-based Power Management in the Shipboard Power System. In IEEE Electric Ship Technology Symposium. New York, NY: IEEE. 

Vu, T., Paran, S., El Mezyani, T., & Edrington, C. (2015). Real-time Distributed Power Optimization in the DC Microgrids of Shipboard Power Systems. In IEEE Electric Ship Technology Symposium. New York, NY: IEEE. 

Vu, T., Paran, S., Diaz, F., El Mezyani, T., & Edrington, C. (2015). Model Predictive Control for Power Control in Islanded DC Microgrids. In IEEE Industrial Electronics Conference, Yokagama, Japan. New York, NY: IEEE. 

Griffin, L. A., Fletcher, F., & Edrington, C. S. (2014). A Particle Swarm Optimization Based Maximum Torque per Ampere Control for a Switched Reluctance Motor. In Industrial Electronics Conference, IEEE, Dallas, TX. New York, NY: IEEE. 

Paran, S., Fleming, F., Li, D., & Edrington, C. S. (2014). Utilization of Adaptive PHIL Interfaces for Harmonic Load Cases. In Industrial Electronics Conference, IEEE, Dallas, TX. New York: IEEE. 

Hasanzadeh, A., Edrington, C. S., & Leonard, J. P. (2013). Parallel VSIs Wireless Control by Emulation of Output Current State Using Optimal Linear Controller. In IEEE Applied Power Electronics Conference and Exposition, Long Beach, CA (pp. 1139 - 1144). New York, NY: IEEE. 

Khatami, Z., Abedi, M., Gharehpetian, G., & Edrington, C. S. (2013). Frequency Control Design for Two-Areas Network Connected with HVDC. In North American Power Symposium (pp. 1-6). New York, NY: IEEE. 

Leonard, J. P., & Edrington, C. S. (2013). Modeling and Simulation of Shipboard Nonlinear Dynamic Loads using Volterra Kernels. In IEEE Electric Ship Technologies Symposium (pp. 249 - 255). New York, NY: IEEE. 

Nyanteh, Y., Graber, L., Srivastava, S., Edrington, C. S., Cartes, D. A., & Rodrigo, H. (2013). Determination of Remaining Life of Rotating Machines in Shipboard Power Systems by Modeling of Dielectric Breakdown Mechanisms. In IEEE Electric Ship Technologies Symposium (pp. 49 - 54). New York, NY: IEEE. 

Paran, S., & Edrington, C. S. (2013). Improved Power Hardware in the Loop Interface Methods via Impedance Matching. In IEEE Electric Ship Technologies Symposium (pp. 342 - 346). New York, NY: IEEE. 

Salmani, A., & Edrington, C. S. (2013). Small-signal stability assessment of the power electronic-based AC systems using impedance measurnment-based technique. In North American Power Symposium (pp. 1 - 6). New York, NY: IEEE. 

Watterson, J., White, L., Battacharaya, S., Widener, C., Bosworth, M., Vodyakho, O., Neumayer, D., Steurer, M., & Edrington, C. S. (2013). Operation and Design Considerations of FID at Distribution Voltages. In IEEE Applied Power Electronics Conference and Exposition (pp. 2206 - 2211). New York, NY: IEEE. 

Akar, F., Fleming, F., & Edrington, C. S. (2012). A Computationally Intelligent Maximum Torque per Ampere Control Strategy for Switched Reluctance Machines. In IEEE International Electric Vehicle Conference (pp. 1 - 6). New York, NY: IEEE. 

Edrington, C. S., Bevis, T., Leonard, J. P., & Hasanzadeh, A. (2012). Application of Power Hardware-in-the-Loop for Electric Vehicle Propulsion Evaluation: A Case Study Utilizing Switched Reluctance Machines. In IECON 2012 38th Annual Conference on IEEE Industrial Electronics Society (pp. 1 - 8). New York, NY: IEEE. 

El-Mezyani, T., Wilson, R., Leonard, J. P., Edrington, C. S., Srivastava, S., Khazraei, M., Qin, H., Kimball, J., & Ferdowsi, M. (2012). Evaluation of Nonlinearity and Complexity in SST Systems. In IEEE International Systems Conference (pp. 1 - 7). New York, NY: IEEE. 

Fleming, F., Akar, F., & Edrington, C. S. (2012). An Optimal Maximum Torque per Ampere Strategy for Switched Reluctance Machines. In International Transportation Electrification Conference (pp. 1 - 6). New York, NY: IEEE. 

Fleming, F., & Edrington, C. S. (2012). A Comparison of Machine Modeling Methods for Real-time Applications. In IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society (pp. 1 - 6). New York, NY: IEEE. 

Fleming, F., & Edrington, C. S. (2012). A Power Hardware in the Loop Applications Study for Benchmarking Electromagnetic Device Modeling Methods. In ASNE Electric Machines Technology Symposium (pp. 1 - 9). Alexandria, VA: American Society of Naval Engineers. 

Hasanzadeh, A., Edrington, C. S., & Bevis, T. (2012). Comprehensive Study of Power Quality Criteria Generated by PV Converters and their Impacts on Distribution Transformers. In IECON 2012 38th Annual Conference on IEEE Industrial Electronics Society (pp. 1 - 6). New York, NY: IEEE. 

Hasanzadeh, A., Edrington, C. S., & Leonard, J. P. (2012). Optimal Linear Controller Design of Standalone VSI Including Emulated Output Current State. In IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society (pp. 1 - 6). New York, NY: IEEE. 

Paran, S., Edrington, C. S., & Vural, B. (2012). Investigation of HIL Interfaces in Nonlinear Load Studies. In North American Power Symposium (pp. 1 - 6). New York, NY: IEEE. 

Soto, D., Hasanzadeh, A., & Edrington, C. S. (2012). Gas Turbine - Synchronous Generator System Emulation using Power Electronics Converters. In North American Power Symposium (pp. 1 - 6). New York, NY: IEEE. 

Stroupe, N., Hasanzadeh, A., Edrington, C. S., & Bevis, T. (2012). Multi-Platform Real-Time Realization of Isolated Permanent Magnet Synchronous Generator. In IECON 2012 38th Annual Conference on IEEE Industrial Electronics Society (pp. 1 - 6). New York, NY: IEEE. 

Stroupe, N., Hasanzadeh, A., & Edrington, C. S. (2012). Real-Time High Speed Generator Emulation for Hardware-In-The-Loop Application. In ASNE Electric Machines and Technology Symposium (pp. 1 - 8). Alexandria, VA: American Society of Naval Engineers. 

Vural, B., & Edrington, C. S. (2012). A Novel Inductive-Capacitive Pulse Forming Circuit for Pulse Power Load Applications. In IECON 2012 38th Annual Conference on IEEE Industrial Electronics Society (pp. 1 - 6). New York, NY: IEEE. 

Vural, B., & Edrington, C. S. (2012). Ultra-Capacitor Based Pulsed Power Management in Electrical Ships. In IEEE Transportation Electrification Conference and Exposition (pp. 1 - 5). New York, NY: IEEE. 

Hasanzadeh, A., Edrington, C. S., & Mokhtari, H. (2011). A Novel LQR Based Optimal Tuning Method for IMP-Based Linear Controllers of Power Electronics/Power Systems. In IEEE 50th IEEE Conference on Decision and Control and European Control Conference, Orlando, FL (pp. I - 6). New York, NY: IEEE. 

Hasanzadeh, A., Edrington, C. S., & Mokhtari, H. (2011). Optimal LQR-based Multi-loop Linear Control Strategy for UPS Inverter Applications using Resonant Controller. In IEEE 50th IEEE Conference on Decision and Control and European Control Conference, Orlando, FL (pp. 1 - 6). New York, NY: IEEE. 

Afshari, H., Saghaleini, M., Hadley, B., Mirafzal, B., & Edrington, C. S. (2011). A Time-Coordination Approach for Compensating Pulse-Load using Flywheel. In IEEE Energy Conversion Congress and Exposition, Phoenix, AZ (pp. 1 - 7). New York, NY: IEEE. 

Hasanzadeh, A., & Edrington, C. S. (2011). Three-Switch Integrated Single-Phase Rectifier-Inverter Converter in Light PHEV Powertrain. In IEEE Vehicle Power and Propulsion Conference, Chicago, IL (pp. 1 - 6). New York, NY: IEEE. 

Hasanzadeh, A., Edrington, C. S., Leonard, J. P., & Liu, Y. (2011). VSI Optimal Controller Tuning with LQR-Based Gain Space Determination and PSO Finalization in LEV Drive. In IEEE Vehicle Power and Propulsion Conference, Chicago, IL (pp. 1 - 6). New York, NY: IEEE. 

Hasanzadeh, A., Edrington, C. S., Liu, Y., & Leonard, J. P. (2011). An LQR Based Optimal Tuning Method for IMP-Based VSI Controller for Electric Vehicle Traction Drives. In IEEE Vehicle Power and Propulsion Conference, Chicago, IL (pp. 1 - 7). New York, NY: IEEE. 

Soto, D., Balathandayuthapani, S., & Edrington, C. S. (2011). Mitigation of PHEV Charging Impact on Transformers via a PV-APF Harmonic Compensation Technique: Application to V2G Integration. In IEEE Vehicle Power and Propulsion Conference, Chicago, IL (pp. 1 - 5). New York, NY: IEEE. 

Leng, S., Chung, I., Edrington, C. S., & Cartes, D. (2011). A New Harmonic Distortion Measurement Algorithm for Power Quality Evaluation and Compensation. In IEEE Power and Energy Society General Meeting, Detroit, MI (pp. 1 - 8). New York, NY: IEEE. 

Leng, S., Chung, I., Edrington, C. S., & Cartes, D. A. (2011). Autonomous Operation of Multiple Active Front-Ends for Power Quality Improvement. In The Society for Modeling and Simulation International – Grand Challenges in Modeling and Simulation, The Hague, Netherlands (pp. 1 - 6). Vista, CA: The Society for Modeling and Simulation International. 

Nyanteh, Y., Graber, L., Edrington, C. S., Srivastava, S., & Cartes, D. (2011). Overview of Computer Simulation Models for Partial Discharge and Electrical Treeing to Determine Feasibility for Estimation of Remaining Life of Insulation Systems of Rotating Machines. In IEEE Electrical Insulation Conference, Annapolis, MD (pp. 1 - 6). New York, NY: IEEE. 

Nyanteh, Y., Srivastava, S., Edrington, C. S., & Cartes, D. (2011). Real Time Implementation of PSO for Artificial Neural Network Fault Detection. In The Society for Modeling and Simulation International – Grand Challenges in Modeling and Simulation, The Hague, Netherlands (pp. 1 - 8). Vista, CA: The Society for Modeling and Simulation International. 

Balathandayuthapani, S., Fleming, F., Edrington, C. S., & El-Kharashi, E. (2011). Impact of Modifying the Stator Tooth Tip on Electomagnetic Torque Production for an 8/6 Switched Reluctance Machine. In IEEE International Electric Machines and Drives Conference, Niagra, Canada (pp. 1 - 6). New York, NY: IEEE. 

Balathandayuthapani, S., Edrington, C. S., & Henry, S. (2011). Study on Converter Topologies for Capacitive Pulse Forming Network and Energy Storage Units in Electric Ships. In IEEE Electric Ship Technology Symposium, Arlington, VA (pp. 459 - 462). New York, NY: IEEE. 

Edrington, C. S., Liu, Y., Leonard, J. P., Henry, S., & Balathandayuthapani, S. (2011). Rapid Prototyping CHIL Methodology for Advanced Converter Studies. In IEEE Electric Ship Technology Symposium, Arlington, VA (pp. 370 - 373). New York, NY: IEEE. 

Sattler, M., & Edrington, C. S. (2011). Analysis of Bifurcation Behavior in Power Converters and the Impact on the Design Process. In IEEE Electric Ship Technology Symposium, Arlington, VA (pp. 203 - 206). New York, NY: IEEE. 

Vodyakho, O., Fleming, F., Steurer, M., & Edrington, C. S. (2011). Implementation of a Virtual Induction Machine Test bed Utilizing the Power Hardware-in-the-loop Concept. In IEEE Electric Ship Technology Symposium, Arlington, VA (pp. 52 - 55). New York, NY: IEEE. 

Vodyakho, O., Chiocchio, T., Steurer, M., Edrington, C. S., & Sloderbeck, M. (2011). Modeling of Medium Voltage Power Electronics Converters Utilizing Advanced Simulation Tools. In IEEE Applied Power Electronic Conference, Fort Worth, TX (pp. 763 - 770). New York, NY: IEEE. 

Vodyakho, O., Widener, C., Steurer, M., Neumayr, D., Edrington, C. S., Bhattacharya, S., & Mirzaee, H. (2011). Development of Solid-State Fault Isolation Devices for Future Power Electronics-Based Distribution Systems. In IEEE 26th Applied Power Electronic Conference and Exposition (pp. 113 – 118). New York, NY: IEEE. 

Azongha, S., Balathandayuthapani, S., Edrington, C. S., & Leonard, J. P. (2010). Grid Integration Studies of a Switched Reluctance Generator for Future Hardware in the Loop Experiments. In 36th Annual Conference of the IEEE Industrial Electronics Society, Phoenix, AZ (pp. 3079 – 3084). New York, NY: IEEE. 

Bevis, T., Edrington, C. S., & Leonard, J. P. (2010). Application of Power Hardware in the Loop for Electric Vehicles: A Case Study Utilizing Switched Reluctance Machines. In 36th Annual Conference of the IEEE Industrial Electronics Society, Phoenix, AZ (pp. 2499 – 2503). New York, NY: IEEE. 

Edrington, C. S., Balathandayuthapani, S., & Cao, J. (2010). Analysis of Integrated Storage and Grid Interfaced Photovoltaic System via Nine-switch Three-level inverter. In 36th Annual Conference of the IEEE Industrial Electronics Society, Phoenix, AZ (pp. 3258 – 3262). New York, NY: IEEE. 

Saghaleini, M., Mirafzal, B., & Edrington, C. S. (2010). Regenerative Energy Management for Pulse-Loads in Dual DC-AC Micro-grids. In 36th Annual Conference of the IEEE Industrial Electronics Society, Phoenix, AZ (pp. 674 - 679). New York, NY: IEEE. 

Edrington, C. S., Vodyakho, O., Hacker, B., Azongha, S., Khaligh, A., & Onar, O. (2010). Virtual Battery Charging Station Utilizing Power-Hardware-in-the-Loop: Application to V2G Impact Analysis. In IEEE Vehicle Power and Propulsion Conference, Lille, France (pp. 1 - 6). New York, NY: IEEE. 

Sattler, M., Liu, Y., & Edrington, C. S. (2010). Comparison of Linear and Nonlinear Buck Converter Models with Varying Compensator Gain Values for Design Optimization. In Proceedings of the North American Power Symposium, Arlington, TX (pp. 1 - 7). New York, NY: IEEE. 

Edrington, C. S., Balathandayuthapani, S., & Cao, J. (2010). Analysis and Control of a Multi-string Photovoltaic (PV) System Interfaced with a Utility Grid. In IEEE Power and Energy Society General Meeting, Minneapolis, MN (pp. 1 - 6). New York, NY: IEEE. 

Ramachandran, B., Srivastava, S., Cartes, D., & Edrington, C. S. (2010). Distributed Energy Resource Management in a Smart Grid by Risk Based Auction Strategy for Profit Maximization. In IEEE Power and Energy Society General Meeting, Minneapolis, MN (pp. 1 - 7). New York, NY: IEEE. 

Sattler, M., Wilson, R., Edrington, C. S., El-Mezyani, T., Srivastava, S., & Cartes, D. (2010). Approximate Entropy Measure of Nonlinearities in a DC/DC Converter. In The Society for Modeling and Simulation International – Grand Challenges in Modeling and Simulation, Ottawa, Canada (pp. 219 - 224). Vista, CA: The Society for Modeling and Simulation International. 

Vodyakho, O., Steurer, M., Edrington, C. S., Karady, G., & Bhattacharya, S. (2010). Instantiation of Solid State Fault Isolation Devices for Future Power Electronic based Distribution Systems. In IEEE Power and Energy Society General Meeting, Minneapolis, MN (pp. 1 - 8). New York, NY: IEEE. 

Nyanteh, Y., Edrington, C. S., Srivastava, S., & Cartes, D. (2010). Fault Detection and Diagnosis for Condition Based Maintenance of Electrical Machines using Particle Swarm Optimization. In ASNE Electrical Machines and Technology Symposium, Philadelphia, PA (pp. 1 - 9). Alexandria, VA: American Society of Naval Engineers. 

Schoder, K., Langston, J., Steurer, M., Azongha, S., Sloderbeck, M., Chiocchio, T., Edrington, C., Farrell, A., Vaidya, J., & Yost, K. (2010). Hardware in the Loop Testing of a High-Speed Generator Excitation Controller. In ASNE Electrical Machines and Technology Symposium, Philadelphia, PA (pp. 1 - 6). Alexandria, VA: American Society of Naval Engineers. 

Steurer, M., Vodyakho, O., Neumayr, D., Widener, C., Siddique, M., Edrington, C., Karady, G., & Bhattacharya, S. (2010). Development of Solid State Fault Isolation Devices for Future Power Electronic based Distribution. In FREEDM Systems Center Annual Conference, Tallahassee, FL (pp. 16 - 21). Future Renewable Electric Energy Delivery Center, North Carolina State University, Campus Box 7571, Raleigh, NC 27695-7571. 

Xiros, N. I., Edrington, C. S., & Balathandayuthapani, S. (2010). Nonlinear Modeling of Linear Induction Machines for Analysis and Control of Novel Electric Warship Subsystems. In ASNE Electrical Machines and Technology Symposium, Philadelphia, PA (pp. 1 - 10). Alexandria, VA: American Society of Naval Engineers. 

Wilson, R., Sattler, M., El-Mezyani, T., Srivastava, S., Edrington, C., & Cartes, D. (2010). A Measure for Complex Dynamics in Power Systems. In International Multi-Conference Complexity, Informatics, and Cybernetics, Orlando, FL (pp. 1 - 6). Winter Garden, FL: International Institute of Informatics and Systemics. 

Vodyakho, O., Edrington, C. S., Steurer, M., Azongha, S., & Fleming, F. (2010). Synchronization of Three-phase Converters and Virtual Microgrid Implementation Utilizing the Power Hardware in the Loop Concept. In IEEE Applied Power Electronics Conference and Exposition, Palm Springs, CA (pp. 216 - 222). New York, NY: IEEE. 

Ramachandran, B., Srivastava, S. K., Cartes, D. A., Edrington, C. S., & Subramanian, S. (2010). Intelligent Agent-based Auction by Economic Generation Scheduling for Microgrid Operation. In IEEE Innovative Smart Grid Technologies, Washington, DC (pp. 1 - 6). New York, NY: IEEE. 

Bevis, T., Hacker, B., Edrington, C. S., & Azongha, S. (2009). A Review of PHEV Grid Impacts. In North American Power Symposium, Starkville, MS (pp. 1 - 6). New York, NY: IEEE. 

Hacker, B., Azongha, S., & Edrington, C. S. (2009). PHEV Impacts on Microgrid Systems. In IEEE Electrical and Power Energy Conference, Montreal, Canada (pp. 1 - 7). New York, NY: IEEE. 

Ramachandran, B., Edrington, C. S., Cartes, D. A., & Subramanian, S. (2009). Online Economic Environmental Optimization of a Microgrid Using an Improved Fast Evolutionary Programming Technique. In North American Power Symposium, Starkville, MS (pp. 1 - 6). New York, NY: IEEE. 

Vodyakho, O., Steurer, M., Edrington, C. S., Karady, G., Chowdhury, B., & Bhattacharya, S. (2009). Design of a Solid-state Fault Isolation Device for Implementation in Power Electronic Based Distribution Systems. In North American Power Symposium, Starkville, MS (pp. 1 - 6). New York, NY: IEEE. 

Edrington, C. S., Vodyakho, O., Steurer, M., Fleming, F., & Krishnamurthy, M. (2009). Power Semiconductor Loss Evaluation in Voltage Source IGBT Converters for Three-Phase Motor Drives. In IEEE Vehicular Power and Propulsion Conference, Detroit, MI (pp. 1434 - 1439). New York, NY: IEEE. 

Vodyakho, O., Edrington, C. S., Steurer, M., Fleming, F., & Krishnamurthy, M. (2009). Influence of DC-Link Voltage Fluctuations on Three-Phase Induction Motor Drives. In IEEE Vehicular Power and Propulsion Conference, Detroit, MI (pp. 748 - 753). New York, NY: IEEE. 

Fleming, F., Edrington, C. S., Steurer, M., & Vodyakho, O. (2009). Development and Implementation of a 25 kW Test Bed Utilizing the Power Hardward in the Loop Concept. In The Society for Modeling and Simulation International – Grand Challenges in Modeling and Simulation, Istanbul, Turkey (pp. 136 - 141). Vista, CA: The Society for Modeling and Simulation International. 

Langston, J., Edrington, C. S., Poroseva, S., Steurer, M., & Vanli, O. (2009). Uncertainty Quantification in Response Surface Models in Parametric Analysis. In The Society for Modeling and Simulation International – Grand Challenges in Modeling and Simulation, Istanbul, Turkey (pp. 128 - 135). Vista, CA: The Society for Modeling and Simulation International. 

Leng, S., Liu, W., Chung, I., Cartes, D., & Edrington, C. S. (2009). Design, Modeling, and Control of a Single Phase Reluctance Machine. In International Joint Conference on Neural Networks, Atlanta, GA (pp. 1758 - 1763). New York, NY: IEEE. 

Fleming, F., Edrington, C. S., & Steurer, M. (2009). Development and Implementation of a Virtual Machine for Variable Speed Drives Testing. In IEEE International Electrical Machines and Drives Conference, Miami, FL (pp. 1161 - 1166). New York, NY: IEEE. 

Sloderbeck, M., Edrington, C. S., & Steurer, M. (2009). Hardware-in-the-Loop Experiments with a Simulated Electric Ship Power System Utilizing a 5 MW Variable Voltage Source Converter Amplifier. In IEEE International Electrical Machines and Drives Conference, Miami, FL (pp. 1167 – 1172). New York, NY: IEEE. 

Vodyakho, O., Steurer, M., Edrington, C. S., Karady, G., & Chowdhury, B. (2009). Fault Isolation Device for Power Electronics based Distribution Systems. In FREEDM Systems Center Annual Conference, Raleigh, NC (pp. 1 - 4). Raleigh, NC: NCSU Future Renewable Electric Energy Delivery Center. 

Andrus, M., Steurer, M., Edrington, C. S., Bogdan, F., Ginn, H., Dougal, R., Santi, E., & Monti, A. (2009). Real-time simulation-based Design of a Power-hardware-in-the-loop Setup to Support Studies of Shipboard MVDC Issues. In IEEE Electric Ship Technologies Symposium, Baltimore, MD (pp. 142 – 151). New York, NY: IEEE. 

Andrus, M., Steurer, M., & Edrington, C. S. (2008). Applying Multi-terminal DC System Control Concepts to a Multi-zonal, Shipboard MVDC Power System. In ASNE Advanced Naval Propulsion Conference, Washington, DC (pp. 1 - 8). Alexandria, VA: American Society of Naval Engineers. 

El-Kharashi, E., Edrington, C. S., Fleming, F., & Bennett, R. (2008). Turn-on and Conduction Angle Selection for Disk-type Rotor SRM. In 34th Annual Conference of the IEEE Industrial Electronics Society, Orlando, FL (pp. 1433 - 1438). New York, NY: IEEE. 

Bennett, R., Edrington, C. S., & Fleming, F. (2008). Application of a Maximum Torque per Ampere Strategy for a DSRM Drive. In IEEE Vehicular Power and Propulsion Conference, Harbin, China (pp. 1 - 6). New York, NY: IEEE. 

Fleming, F., Edrington, C. S., & Bennett, R. (2008). Analysis of Failure Modes in Reduced Parts Converters for SRM Drives. In IEEE Vehicular Power and Propulsion Conference, Harbin, China (pp. 1 - 6). New York, NY: IEEE. 

Quiroga, J., Cartes, D., Edrington, C. S., & Liu, L. (2008). Neural Network Fault Diagnosis of PMSM Stator Winding Short under Load Fluctuation. In Power Electronics and Motion Control Conference, Poznan, Poland (pp. 793 - 798). New York, NY: IEEE. 

Edrington, C. S., & Minor, S. (2007). Analysis and Design of a 5-phase DSRM Drive. In IEEE Vehicle Power and Propulsion Conference, Arlington, TX (pp. 364 - 369). New York, NY: IEEE. 

Edrington, C. S., Yancey, B., Tounsand, A., & Powell, J. (2006). Analysis of a Reduced Parts Converter for an 8/6 Switched Reluctance Drive. In 32th Annual Conference of the IEEE Industrial Electronics Society, Paris, France (pp. 914 - 919). New York, NY: IEEE. 

Edrington, C. S., Yancey, B., Tounsand, A., & Powell, J. (2006). Analysis and Operational Characteristics of a Reduced Parts Converter for Bipolar Excitation of SR Drives. In IEEE Vehicle Power and Propulsion Conference, Windsor, England (pp. 1 - 6). New York, NY: IEEE. 

Krishnamurthy, M., Edrington, C. S., & Fahimi, B. (2006). On the Measurement of Mutual Inductance for a Switched Reluctance Machine. In IEEE 37th Annual Power Electronics Specialists Conference, Jehu, Korea (pp. 1 - 7). New York, NY: IEEE. 

Edrington, C. S., Krishnamurthy, M., & Fahimi, B. (2005). Enhancement of Torque Pulsation and Acoustic Response in SRM Drives via Bipolar Excitation. In SAE-Future Transportation Technology Conference, Chicago, IL (pp. 1 - 5). Warrendale, PA: Society of Automotive Engineers World Headquarters. 

Krishnamurthy, M., Edrington, C. S., & Fahimi, B. (2005). Comparison of Various Converter Topologies for Bipolar Switched Reluctance Motor Drives. In IEEE-36th Annual Power Electronics Specialist Conference, Recife, Brazil (pp. 1858 -1864). New York, NY: IEEE. 

Edrington, C. S., & Fahimi, B. (2004). Bipolar Excitation of Switched Reluctance Machines. In IEEE Power Engineering Society General Meeting, Denver, CO (pp. 1351 -1358). New York, NY: IEEE. 

Krishnamurthy, M., Edrington, C. S., & Fahimi, B. (2004). Prediction of Rotor Position at Standstill and Flying Shaft Conditions in Switched Reluctance Machines. In IEEE-Applied Power Electronics Conference, Anaheim, CA (pp. 537 - 544). New York, NY: IEEE. 

Edrington, C. S., & Fahimi, B. (2003). Coolant Pump Drive: An Application for Switched Reluctance Machines. In IEEE 58th Vehicular Technology Conference, Orlando, FL (pp. 3226 - 3230). New York, NY: IEEE. 

Edrington, C. S., & Fahimi, B. (2003). On Prediction of Dynamic Performance in Adjustable Speed Switched Reluctance Motor Drives. In North American Power Symposium, Rolla, MO (pp. 1 - 6). New York, NY: IEEE. 

Edrington, C. S., Fahimi, B., Kaluvagunta, D., & Jodar, J. (2003). Investigation of Electromagnetic Force Components in Switched Reluctance Machines: Application to Design And Control. In IEEE 38th Annual Industrial Applications Conference, Salt Lake City, UT (pp. 219 - 226). New York, NY: IEEE. 

Edrington, C. S., & Fahimi, B. (2003). An Auto-Calibrating Model for an 8/6 Switched Reluctance Motor Drive: Application to Design and Control. In IEEE-34th Annual Power Electronics Specialists Conference, Acapulco, Mexico (pp. 409 - 415). New York, NY: IEEE. 

Edrington, C. S., Fahimi, B., & Sepe, R. B. (2002). Sensorless Super-High-Speed Switched Reluctance Generators. In IEEE 28th Annual Conference of the Industrial Electronics Society, Seville, Spain (pp. 1026 – 1031). New York, NY: IEEE. 

Presentations

Invited Lectures and Readings of Original Work

Edrington, C. S. (2011, October). Applications of Hardware in the Loop for Energy Integration Research. Delivered at Korean Institute for Energy Research, Daejon, South Korea. (International)

Edrington, C. S. (2011, October). Applications of Hardware in the Loop for Energy Integration Research. Delivered at Chunbok National University, Cheongju, South Korea. (International)

Patented Inventions

Salmani, A., & Edrington, C. (2016). Method for Small-signal Stability Assessment of Power Systems Using Shunt Current Injection Source Side and Series Voltage Injection Load Side Perturbations. 9,519,032. 

Salmani, A., & Edrington, C. (2016). Method for Small-signal Stability Assessment of Power Systems within Instability Borders Using Source Side and Load Side Perturbations. 9,513,342. 

Salmani, A., & Edrington, C. (2016). Method for small-signal stability assessment of power systems using source side and load side series voltage injection perturbation. 9,500,717. 

Salmani, A., & Edrington, C. (2016). Method for Small-signal Stability Assessment of Power Systems Using Source Side Shunt Current Injection and Load Side Perturbations. 9,470,762. 

Salmani, A., & Edrington, C. (2016). Real-time small-signal stability assessment of power electronic-based components in contemporary power systems. 9,316,701. 

Contracts and Grants

Contracts and Grants Funded

Edrington, C. S., Schoder, K., & Steurer, M. (2018–2021). Impact Analysis of Integrating Power Network Heath Monitoring and Prognosis into Power and Energy Management of Ship Power Systems. Funded by Office of Naval Research. Total award $900,000. 

Edrington, C. S., & Vu, T. (2018–2021). Evidence Theory based Uncertainty Quantification and Improvement in Naval Integrated Power Systems Events Forecasting. Funded by Office of Naval Research. Total award $450,000. 

Edrington, C. (Mar 2017–Mar 2020). Distributed Autonomy, Resiliency, and Optimality in Naval Microgrids . Funded by Office of Naval Research. Total award $150,000. 

Edrington, C. (Jan 2017–Jan 2021). Electric Ship Research and Design Consortium. Funded by Office of Naval Research. Total award $1,034,000. 

Edrington, C. (Jan 2017–Jan 2019). Collaborative REsearch of Decentralization, ElectrificatioN, Communications and Economics (CREDENCE). Funded by National Science Foundation through the FREEDM Systems Center. Total award $200,000. 

Steurer, M., Edrington, C., Schoder, K., Yu, M., Ginn, H., & Nwankpa, C. (Jan 2017–Dec 2018). Project Title: Partitioning Power & Energy Management Control and Information Functions for Naval Shipboard Distribution Systems and Evaluating Control Performance using Hardware-in-the-Loop Methods. Funded by Office of Naval Research. Total award $118,000. 

Edrington, C. (Dec 2016–Dec 2017). Prototype Refinement, Simulation and Testing of a non-rare‑earth Linear Machine for ICE Valve Control. Funded by Sentimetal Journeys Inc. Total award $150,000. 

Edrington, C. (Aug 2016–Sep 2017). Integration of Intelligent Energy Management in a FREEDM System. Funded by National Science Foundation: Through the FREEDM Systems Center. Total award $50,000. 

Edrington, C. (Nov 2015–Oct 2016). Design and Analysis of a non-rare-earth Linear Machine for ICE Valve Control. Funded by Sentimetal Journey, Inc. Total award $79,983. 

Edrington, C. (Aug 2015–Sep 2016). Distributed Model Predictive Control based for Intelligent Energy Management of the FREEDM System. Funded by NSF ERC FREEDM. Total award $60,000. 

Edrington, C. (Aug 2015–Sep 2016). Real time stability analysis utilizing nonlinear time series analysis and embedding phase space techniques. Funded by NSF ERC FREEDM. Total award $60,000. 

El Mezyani, T., & Edrington, C. (Aug 2015–Sep 2016). Design of Distributed Resilient Sensing Systems. Funded by NSF ERC FREEDM. Total award $70,000. 

Edrington, C. (Apr 2015–Apr 2016). Organic Distributed Decision Making in Hetrogenous Energy Systems: Phase II. Funded by Office Naval Research. Total award $35,000. 

Edrington, C. (Mar 2015–Oct 2017). RTDS Instantiation of an Electrolyzer/Fuel Cell Based Power Electronics-based Distribution System. Funded by Idaho National Laboratory. Total award $220,000. 

Edrington, C. (Sep 2014–Aug 2015). Developing Small-signal Stability Analysis Techniques/Metrics to Monitor and Control FREEDM System. Funded by NSF ERC FREEDM. Total award $60,000. 

Edrington, C. (Sep 2014–Aug 2015). MPC-based Distributed Control for Intelligent Energy Management. Funded by NSF ERC FREEDM. Total award $60,000. 

Edrington, C. (Jun 2014–May 2015). Organic Distributed Decision Making in Hetrogenous Energy Systems: Phase I. Funded by Office of Naval Research. Total award $24,500. 

Edrington, C. (Jan 2014–Jan 2017). Electric Ship Research and Development Consortium: Control of Distributed Energy Storage and Impedance-based Control. Funded by Office of Naval Research. Total award $517,221. 

Edrington, C. (Sep 2013–Sep 2014). Verification of FREEDM Systems Control Robustness. Funded by NSF ERC FREEDM. Total award $120,000. 

Edrington, C. (Jan 2013–Jan 2014). Electric Ship Research and Development Consortium: Advanced Converter Control. Funded by Office of Naval Research. Total award $195,263. 

Edrington, C. (Oct 2012–Oct 2013). Power Electronic Systems for Magnetostrictive Wave Energy Harvesters. Funded by National Science Foundation. Total award $80,000. 

Edrington, C. (Sep 2012–Jan 2013). Intermediate Transient Support of High Rate Pulsed Loads. Funded by Office of Naval Research. Total award $25,000. 

Edrington, C., & Srivastava, S. (Sep 2012–Sep 2013). Large Scale Systems Studies: Addressing Nonlinearity and Complexity in FREEDM Systems. Funded by NSF ERC FREEDM. Total award $115,000. 

Edrington, C. (Mar 2012–Apr 2012). Assessment of Modeling and Simulation in Testing and Validation of Health Monitoring Algorithms for Aircraft Generators. Funded by Office of Naval Research. Total award $12,185. 

Edrington, C. S., & Srivastava, S. (Sep 2011–Sep 2012). Large Scale Systems Studies: Addressing Nonlinearity and Complexity in FREEDM Systems. Funded by National Science Foundation. Total award $115,000. 

Edrington, C. S. (PI). (Jun 2011–Dec 2011). Flexible Cryo-Cooled Power Conductors for Electromagnetic Railguns: SBIR Phase 1. Funded by Office of Naval Research. Total award $7,500. 

Edrington, C. S. (PI). (Jan 2011–Jul 2011). Modeling, Integration and Characterization of PHEVs and PVs. Funded by State of Florida - Florida Energy Systems Consortium. Total award $75,000. 

Steurer, M. (PI), & Edrington, C. S. (Sep 2010–Aug 2011). Fault Isolation Device Technology Development. Funded by National Science Foundation - Engineering Research Center. Total award $82,686. 

Steurer, M. (PI), & Edrington, C. S. (Sep 2010–Aug 2011). FREEDM System Model Verification, Validation and Accreditation. Funded by National Science Foundation - Engineering Research Center. Total award $103,953. 

Edrington, C. S. (PI), & Srivastava, S. (Aug 2010–Aug 2011). Addressing Nonlinearities and Complexity in FREEDM Systems. Funded by National Science Foundation - Engineering Research Center. Total award $40,000. 

Edrington, Chris S (PI), Steurer, M., & Dale, S. J. (Aug 2010–Sep 2012). Integration of NonLinear Loads into the Next Generation. Funded by Office of Naval Research. Total award $3,780,650. 

Steurer, Michael (PI), Pamidi, S. V., & Edrington, C. S. (Jul 2010–Jul 2011). Shielded Iron Core Inductive Superconducting Fcl. Funded by Bruker BioSpin Corporation. Total award $108,854. 

Edrington, Chris S (PI). (Jul 2010–Jul 2011). A Nationwide Consortium to Revitalize Electric Power. Funded by University of Minnesota. Total award $25,000. 

Meeker JR, Richard H (PI), Steurer, M., Li, H., Dale, S. J., & Edrington, C. S. (Dec 2009–Jun 2011). RECOVERY ACT: The Sunshine State Solar Grid Initiative. Funded by U. S. Department of Energy. Total award $599,999. 

Steurer, Michael (PI), & Edrington, C. S. (Sep 2009–Apr 2010). High Speed Generator Controller Testing. Funded by Electrodynamics Associates Inc. Total award $169,731. 

Edrington, Chris S (PI), Sloderbeck, M. J., Bogdan, F., Steurer, M., & Dale, S. J. (Aug 2009–Jul 2011). Integration of Non Linear Dynamic Loads into the Next. Funded by Office of Naval Research. Total award $4,314,200. 

Steurer, Michael (PI), & Edrington, C. S. (Jul 2009–Dec 2009). Impact Of Wind Power Integration On Fault Current. Funded by Electric Power Research Instit. Total award $29,963. 

Edrington, Chris S (PI), & Dale, S. J. (Mar 2009–Aug 2011). Integration of Nonlinear Dynamic Loads Into the Next Gen. Funded by Office of Naval Research. Total award $1,901,350. 

Edrington, C. S. (PI), Zheng, J., Li, H., Steurer, M., Cartes, D., & Alvi, F. (Jan 2009–Dec 2010). Microgrids for a Sustainable Energy Future. Funded by State of Florida - Florida Energy Systems Consortium. Total award $719,333. 

Steurer, M. (PI), & Edrington, C. S. (Oct 2008–Sep 2009). Fault Isolation Device Technology Development. Funded by National Science Foundation - Engineering Research Center. Total award $113,576. 

Edrington, C. S. (May 2008–May 2009). First Year Assistant Professor. Funded by Florida State University. Total award $16,000. 

Postdoctoral Supervision

Bijaeih, M. (Feb 2019–present). 

Papari, B. (Aug 2018–Jan 2019). 

Vahedi, H. (2016–18). 

Vu, T. (2016–18). 

El-Mezyani, T. (2014–16). 

Salmani, M. (May–Aug 2015). 

Li, D. (Jan–Aug 2014). 

Hasanzadeh, A. (2011–13). 

Vural, B. (2011–12). 

Vodyakho, O. (2008–12). 

Henry, S. (2010–11). 

Balathandayuthapani, S. (2009–11). 

Azongha, S. (2009–10). 

Service

Florida State University

FSU University Service

FSU Faculty Senator, College of Engineering representative on the senate (2013–2015).

FSU Faculty Senator, College of Engineering representative on the senate (2010–2012).

Member, University IT Strategic Planning Facilities and Infrastructure Subcommittee - Arkansas State University (2006).

FSU College Service

Member, Search Committee: Associate Dean of Engineering for Research (2013–2014).

FSU Department Service

Member, Undergraduate Curriculum Committee (2016–present).

Chair, Search Committee (2017–2018).

Chair, ECE Area Chair - Power Engineering (2009–2018).

Member, ECE Energy and Materials Faculty Search Committee (2013–2015).

Member, ECE Graduate Committee (2009–2015).

Chair, ECE - CAPS Faculty Search Committee (2014–2015).

Chair, Undergraduate Curriculum Committee (2014–2015).

Chair, ECE Bylaws Committee (2011–2013).

Member, ECE ABET Committee (2010–2013).

Member, ECE Undergraduate Curriculum Committee (2009–2013).

Chair, ECE/CAPS Faculty Search Committee (2012–2013).

Chair, ECE Area Lessons Learned Group 1a (2009).

Member, ECE ABET Program Outcome Review Group 3 (2008).

Member, Senior Design Project Evaluator (2008).

Chair, ABET Program Outcome Review Group 2 (2008).

Member, Senior Design Project Evaluator (2008).

Member, ECE ABET Area Lessons Learned (2007).

Member, ECE ABET Program Outcome Review Group 2 (2007).

Member, College of Engineering Computer Committee - Arkansas State University (2006–2007).

Member, College of Engineering Grievance Committee - Arkansas State University (2006–2007).

Chair, College of Engineering Mathematics Curriculum Committee - Arkansas State University (2006–2007).

Chair, College of Engineering Website Committee - Arkansas State University (2006–2007).

Chair, Outcome 10 for ABET Assessment - College of Engineering - Arkansas State University (2006–2007).

Member, Outcome 2 Committee - College of Engineering - Arkansas State University (2006–2007).

FSU Institute or Center Service

Member, Executive Committee Center for Advanced Power Systems (2015–present).

The Profession

Guest Editing for Refereed Journals

Davoudi, A., Guerrero, J., Lewis, F., Balog, R., Johnson, B., Weaver, W., Wang, L., Edrington, C. S., Blasco-Gimenez, R., & Dominguez-Garcia, A. (Eds.). (2014, September). Special Issue on Advanced Distributed Control of Energy Conversion Devices and Systems [Special Issue]. IEEE Transactions on Energy Conversion.

Davoudi, A., Edrington, C. S., Jatskevich, J., & Miller, J. (Eds.). (2014). Advanced Modeling, Simulation, Control, and Optimization Paradigms for Vehicular Power Systems [Special Issue]. IEEE Transactions on Vehicular Technology.

Edrington, C. S. (Ed.). (2011, July). Special Issue on Electric Vehicle [Special Issue]. Journal of Power Electronics.

Editorial Board Membership(s)

Electric Power Components and Systems (2011–present).

International Journal of Power Electronics (2008–present).

Guest Reviewer for Refereed Journals

Electric Power Components and Systems (2009–present).

International Journal of Power Electronics (2008–present).

IEEE Transactions on Energy Conversion (2004–present).

IEEE Transactions on Industrial Electronics (2004–present).

IEEE Transactions on Industry Applications (2004–present).

IEEE Transactions on Power Electronics (2004–present).

Proceedings of the IEEE (2013).

IEEE Transactions on Vehicular Technology (2004–11).

Service to Professional Associations

Publications Chair, IEEE International Conference on DC Microgrids (2015–present).

Technical Committee Member, IEEE Electric Ship Technology Symposium (2016–2017).

Technical Track Chair, IEEE Electric Ship Technology Symposium (2014–2015).

Technical Co-Chair, Coordinate Track Chairs and paper reviews for 1/3 of the Technical Tracks, IEEE Industrial Electronics Conference and Exposition (2013–2014).

Treasurer, Tallahassee Area Section, Institute of Electrical and Electronics Engineering (2012–2013).

Technical Track Chair, IEEE Transportation Electrification Conference and Expo (2012–2013).

Session Chair, IECON 38th Annual Conference on IEEE Industrial Electronics Society (2012).

Technical Track Chair, IEEE Transportation Electrification Conference and Expo (2011–2012).

Membership Development - Tallahassee Area Section, Institute of Electrical and Electronics Engineers (2011–2012).

Technical Committee Member, IEEE Electric Ship and Technology Symposium (2010–2011).

Technical Committee Member, IEEE Vehicular Power and Propulsion Conference (2010–2011).

Regional Coordinator - Industrial Electronics Society, Institute of Electrical and Electronics Engineers (2010–2011).

Technical Committee Member, Joint IEEE International Conference on Industrial Electronics (ICIT) & Southeastern Symposium on System Theory (2010–2011).

Chair - Tallahassee Area Section, Institute of Electrical and Electronics Engineers (2009–2011).

Session Chair, American Society of Naval Engineers - Electric Machines and Technology Symposium (2010).

Session Chair, IEEE Applied Power Electronics Conference and Exposition (2010).

Session Chair, North American Power Symposium (2010).

Co-Chair, IEEE Industrial and Commercial Power System Conference (2009–2010).

Associate Technical Editor - Power Electronics Society Newsletter, Institute of Electrical and Electronics Engineers (2009–2010).

Program Committee Topic Chair, IEEE Applied Power Electronics Conference and Exposition (2009).

Session Chair, IEEE Applied Power Electronics Conference and Exposition (2009).

Session Chair, North American Power Symposium (2009).

Secretary - Tallahassee Area Section, Institute of Electrical and Electronics Engineers (2008).

Session Chair, IEEE Vehicular Power And Propulsion Conference (2007).

Chair of Invited Speakers and Tutorials, IEEE Vehicular Power and Propulsion Conference (2006–2007).

Industrial Advisory Board Member, IEEE Vehicular Power and Propulsion Conference (2005–2006).

Service to Other Universities

Graduate Student Supervisory Committee Member for Mr. Mahdi Saghaleini, Florida International University (2010–present). 

Graduate Student Supervisory Committee Member for Ali Kashefi Kaviani, Florida International University (2010–present). 

Additional Service Not Reported Elsewhere

Edrington, C. S. (2008–2016). HKN Advisor. Eta Kappa Nu. 

Edrington, C. S. (2007). SME Co-Advisor. Society of Manufacturing Engineers. 

Edrington, C. S. (2006–2007). Student Mentor. Ronald E. McNair.